How to Deal with Garage Door Dents?

Owners of metal garage doors enjoy low maintenance but there’s a shortcoming in these garages, they dent very easily. Though all the car owners take utmost care while parking their cars in garages but sometimes they hit the doors. Sometimes children playing baseballs can leave dents on these doors. Replacing the panel is not the best solution to this problem. There’s a technique which can be used to eliminate such dents. Let’s discuss the process:

Wash the Dent Area – Take a bucket full of water and add some dish soap in it. Mix it with a piece of sponge. When it’s mixed properly, wash the dented area with this water to remove all the dirt or grime stuck there. Then wash the affected area with clean water and let it dry completely.

Cut the Aluminium Foil – Now take a piece of aluminium foil to cover the dent. Take care when you take out the foil from the roll as it should be long enough to cover the dent completely. Smaller than a required piece of foil can make you tear out the foil again and hinder your work. All the aluminium foil boxes have metal teeth to make it convenient to cut off the foil.

Arrange a Compressed Air Canister and a Lighter – Make an arrangement of a compressed air canister and a lighter and keep them near the door. Remove the top of the canister and start the process. Lay the piece of the foil flat against the door making it cover the entire affected area. Hold it firmly against the door at the foil’s edge.

Heat the Affected Area – Light your lighter and move the flame over the dent area for around a minute. Now remove the foil and hold the canister upside down. Then spray liquid carbon dioxide on the dent for half a minute. Remember, continuing these processes for more than prescribed time can bring adverse results, so do it carefully.

See the Dent Disappearing – The temperature difference between heated dent and liquid carbon dioxide will make the dent to pop out within a few minutes. The dent will disappear absolutely. Then all you need to do is to wash off the residues of carbon dioxide from the door.

The process described above is very effective in removing dents from garage doors. However, if you don’t feel like doing this DIY adventure, there are several Garage Door Dented Panel Repair Simi Valley┬áto relieve you of this burden.

These companies hold a good deal of experience and expertise. They are capable of taking care of all kinds of problems with garage doors. Moreover, charges asked by these companies are very reasonable. With so many companies in the city, you definitely will find an efficient company offering its products and services at affordable charges.

Collect all the details about the company which may be helpful in determining its reliability and reputation. Such pieces of information can easily be obtained online. A short online research can make you select the company easily.

Leave a Reply

Your email address will not be published. Required fields are marked *